Skip to main content

Changes to Step #6

Edit by Matthew Newsom

Pending approval

Before
After
Unchanged

Step Lines

-[* icon_note] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
-[* black] Insert a metal spudger through the front-most slit on the left edge of the top bezel and between the bottom edge of the clip and the left panel, as described above.
+[* icon_note] Orient the console so that the left case is facing toward you and the faceplate is facing toward the right.
+[* black] Insert a metal spudger through the front-most slit on the left edge of the top bezel and between the bottom edge of the clip and the left case, as described above.
[* black] Simultaneously rotate the spudger away from the console and pull up on the top bezel to free the clip.
[* icon_note] You will hear a "pop" signifying that the clip cleared its catch.