Skip to main content

Changes to Step #6

Edit by Matthew Newsom

Pending approval

Before
After
Unchanged

Step Lines

[* icon_note] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
-[* black] Insert a metal spudger through the front left slit of the top panel, underneath the bottom inside edge of the clip, as described above.
-[* black] Simultaneously rotate the spudger away from the console to free the clip and pull up on the top panel.
+[* black] Insert a metal spudger through the front-most slit on the left edge of the top bezel and between the bottom edge of the clip and the left panel, as described above.
+[* black] Simultaneously rotate the spudger away from the console and pull up on the top bezel to free the clip.
[* icon_note] You will hear a "pop" signifying that the clip cleared its catch.