Skip to main content

Changes to Step #6

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert a metal spudger in the front left slit of the top panel, and underneath the bottom inside edge of the clip, as described above.
-[* black] While simultaneously rotating the spudger away from the console to free the clip, pull the top panel up from the rest of the console.
-[* black] The top panel will not come free from the console yet, however the two end clips will make a "pop" sound as they are disengaged.
+[* black] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
+[* black] Insert a metal spudger in the front left slit of the top panel, underneath the bottom inside edge of the clip, as described above.
+[* black] Simultaneously rotate the spudger away from the console to free the clip and pull up on the top panel.
+[* black] You will hear a "pop" signifying that the clip cleared it's catch.