Skip to main content

Changes to this Step

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

+[* black] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
[* black] Start at the front right clip, and insert a metal spudger through the slit in the top panel, underneath the clip as shown above.
[* black] Rotate the spudger away from the console, freeing the clip.
[* icon_note] The clips are very sturdy, and may take a a fair amount of force to undo. You will likely hear a "pop" when a clip is freed.