Skip to main content

Changes to Step #2

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Orient the console so that the words "XBOX 360" on the sides are right-side up, and the front panel is facing to the left.
[* black] Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox.
-[* black] Pry the edge of the fan vent up until the two plastic clips come free.
+[* black] Rotate the spudger away from the console, prying the edge of the fan vent up until the two plastic clips come free.
+[* icon_note] Be sure to rotate the spudger far enough so that the plastic clips clear the silver rim of the top bezel.