Skip to main content

Changes to Step #2

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert a metal spudger between the top fan vent and the top bezel towards the rear of the Xbox.
+[* black] Orient the console so that the words "XBOX 360" on the sides are right-side up and the words "XBOX 360" on the disk tray are sideways.
+[* black] Insert a metal spudger between the top vent and the top panel towards the rear of the Xbox.
[* black] Pry the edge of the fan vent up until the two plastic clips come free.