Skip to main content

Changes to Step #3

Edit by dv1977

Edit declined by Andrew Optimus Goldheart


Step Lines

-[* black] Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.
+[* black] You can see a pull-tab on the left side from a chip which is glued to the surface under it. And this pull-tab is free to take - no glue under it. Just grab it and gentky move to the right - to the chip. Iy's the easiest way to unglue this home button cable. No blade or other stuff needed!
[* icon_caution] The home button cable is very thin, go slowly and be careful not to rip it.
[* black] Remove the LCD shield plate.