Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.
-[* icon_caution] The home button cable is very thin, go slowly and be careful not to rip it.
+ [* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
[* black] Remove the LCD shield plate.