Skip to main content

Changes to Step #3

Edit by firebird3000

Edit declined by Sam Goldheart


Step Lines

-[* black] Slide the point of a spudger behind the shield plate to gently lift the home button cable up off of the front panel.
+[* black] Start by lifting a small flap on the left side of the Home Button connector until the small metal plate underneath the connector is visible. Pry underneath the metal plate to remove the cable.
[* black] Remove the LCD shield plate.
+[* black] DO NOT use the spudger to pull on the cable from underneath the LCD shield plate as it will tear, leaving the connector behind.