Skip to main content

Changes to Step #3

Edit by pep073

Edit declined by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* black] Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.
- [* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
+ [* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again. It also has a little tab on it's left which may be loose and you might get the spudger under. But remain cautious. See next step.
[* black] Remove the LCD shield plate.