Skip to main content

Changes to Step #3

Edit by Basem

Edit declined by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.
- [* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
+[* black] Slide the point of a spudger behind the shield METAL plate to gently peel the home button cable up off of the front panel.
+ [* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. and a metal plate is attached to it , point the spudger tip below the metal not in between the metal and cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
[* black] Remove the LCD shield plate.