Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #7

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereShown here is a picture of the SiTime SI8002AC package with its outer protective casing removed.
[* black] An ASIC to convert the raw signals of the oscillator is stacked on top of the oscillator itself, and the two are wire-bonded together for signal transfer. This entire unit is completely sealed inside the plastic outer package.
[* black] The second picture is an X-Ray of a Bosch BMA 220 showing the stacked die configuration and wire bonds
.
[* black] Insert wisdom hereShown here is a picture of the SiTime SI8002AC package with its outer protective casing removed.
[* black] An ASIC to convert the raw signals of the oscillator is stacked on top of the oscillator itself, and the two are wire-bonded together for signal transfer. This entire unit is completely sealed inside the plastic outer package.
[* black] The second picture is an X-Ray of a Bosch BMA 220 showing the stacked die configuration and wire bonds
.