Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Feedback from capacitors attached to the oscillating plates within the gyroscope is fed to an [link|http://en.wikipedia.org/wiki/Application-specific_integrated_circuit|ASIC] that multiplies raw data by the sensitivty, or gain, of the unit, which is the ratio of output to input of the sensor.
[* black] The sensitivity of MEMS devices is usually in mV/dps (or degrees per second), so the output of the unit in mV divided(in mV) divided by the sensitivity (mV/dps) provides the angular rate applied to the packagepackage in degrees per second.
[* black] The sensitivity of MEMS devices is usually in mV/dps (or degrees per second), so the output of the unit in mV divided(in mV) divided by the sensitivity (mV/dps) provides the angular rate applied to the packagepackage in degrees per second.