Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereIn this photo is the ST LYPR540AH Tri-axis MEMS gyroscope.
[* black] Arrays of capacitive plates drive two semiannular surfaces about a central axis perpendicular to the top plane of the gyro.
[* black] To achieve a linear displacement needed for feedback from the gyroscope, two equal masses are oscillated about the vertical axis. Since their velocities at any given point in time are opposite, external rotation of the device will induce forces opposite to each other. The direction of these forces depends on the axis of external rotation, and is given by the cross product of the vectors representing the axis of rotation and the linear velocity
.
[* black] Insert wisdom hereIn this photo is the ST LYPR540AH Tri-axis MEMS gyroscope.
[* black] Arrays of capacitive plates drive two semiannular surfaces about a central axis perpendicular to the top plane of the gyro.
[* black] To achieve a linear displacement needed for feedback from the gyroscope, two equal masses are oscillated about the vertical axis. Since their velocities at any given point in time are opposite, external rotation of the device will induce forces opposite to each other. The direction of these forces depends on the axis of external rotation, and is given by the cross product of the vectors representing the axis of rotation and the linear velocity
.