Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #13

Edit by bymyhand

Pending approval

Before
After
Unchanged

Step Lines

[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.
[* black] Be careful when installing the logic board. You can easily damage the volume cable between the headphone jack and the side of the logic board.