Skip to main content

Changes to Step #13

Edit by MKoch

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
+[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught. Pay special attention to the small connector underneath the digitizercable, - it can get caught and thereby break off.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.