Skip to main content

Changes to Step #13

Edit by jkgarrett17

Pending approval

Before
After
Unchanged

Step Lines

[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.
+ [* red] The rubber guard goes on the Logic Board above the Digitizer and LCD Ribbon connectors as pictured in the second picture in red.

Image 2

No previous image

Added