Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #11

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] DisconnectUse the edge of a plastic opening tool to gently pry the following connectors from the topup and out of their sockets on the logic board:
[* red] Digitizer cable (From Bottompry from bottom)
[* orange] LCD cable (From Bottompry from bottom)
[* yellow] Headphone jack/volume button cable (From Toppry from top)
[* green] Top Microphone/sleep button cable (From Toppry from top)
[* blue] Front camera cable (From Top)
[* icon_note] It is helpful to use the edge of an iPod opening tool to gently lift the connectors up and out of their sockets on the logic board.
pry from top)
[* black] DisconnectUse the edge of a plastic opening tool to gently pry the following connectors from the topup and out of their sockets on the logic board:
[* red] Digitizer cable (From Bottompry from bottom)
[* orange] LCD cable (From Bottompry from bottom)
[* yellow] Headphone jack/volume button cable (From Toppry from top)
[* green] Top Microphone/sleep button cable (From Toppry from top)
[* blue] Front camera cable (From Top)
[* icon_note] It is helpful to use the edge of an iPod opening tool to gently lift the connectors up and out of their sockets on the logic board.
pry from top)