Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #8

Edit by Brian Rose

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use an iPod opening tool to slightly lift the top edge of the connector cover away from the logic board.
[* black] Use the tip of a spudger to pull the connector cover retaining clips away from the inner frame.
[* black] Remove the connector cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. '''Do not''' clean the connectors themselves with Windex.
[* red] Be careful not to detach a small metal grounding clip.
[* orange] Be careful not to dislodge this small metal nut.

Image 1

Old Version

New Version

Image 3

Old Version

New Version