Skip to main content

Changes to Step #5

Edit by Jason Kurensky

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use an iPod opening tool to pry the lower antenna connector up off its socket on the logic board.
[* black] Make sure you don't damage the blue inductor while prying the antenna connector. If you end up having no service message, double check that the blue inductor is still there and soldered properly (Please could someone highlight the blue inductor in the attached photo for this note)
[* black] Make sure you don't damage the blue inductor while prying the antenna connector. If you end up having no service message, double check that the blue inductor is still there and soldered properly (Please could someone highlight the blue inductor in the attached photo for this note)