Changes to Step #5
Edit by raul mald —
- Before
- After
- Unchanged
Step Lines
- | [* icon_note] The glass panel is held in place by adhesive on all four sides. In the following steps, work carefully to avoid cracking the glass. |
---|---|
+ | [* icon_note] The glass panel is held in place by adhesive on all four sides. In the following steps, work carefully to avoid cracking the glass. I would recommend using a heat gun. |
[* black] Insert an iPod opening tool between the display and the glass panel at the top of the device. | |
[* black] Rotate the iPod opening tool towards the rear of the device, slightly lifting the top of the glass out of the outer case. | |
[* icon_caution] The glass panel does not raise very far. Do not attempt to completely remove the panel yet, or you are likely to break the display screen. |