Skip to main content

Changes to Step #5

Edit by Brett Hartt

Pending approval


Step Lines

[* icon_note] The glass panel is held in place by adhesive on all four sides. In the following steps, work carefully to avoid cracking the glass.
-[* black] Lift the glass panel up slightly by inserting an iPod opening tool between the glass panel and the outer case.
+[* black] Insert an iPod opening tool in the top of the device, between the screen and the glass panel.
+[* black] Rotate the iPod opening tool towards the rear of the device, slightly lifting the top of the glass out of the outer case.
+[* icon_caution] The glass panel does not raise very far. Do not attempt to completely remove the panel yet, or you are likely to break the LCD screen.