Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Marcel Robert

Edit approved by Marcel Robert

Deleted
Added
Unchanged

Step Lines

[title] Unclip the back cover
[* black] Using the guitar pick, unclip the back cover. Quite difficult on newer model, use more than one pick.
[* black] Using the guitar pick, unclip the back cover. Quite difficult on newer model, use more than one pick.
[* black] Easier way to go in is to slide in between volume and power button. This is the softest part of the back cover. The first clip is just a bit further up to the volume + button. So gently lift up to release the first one. You will may be brake one or two bigger clips. But it will clip back just fine with the smaller clips.
[* black] Otherwise, buy a replacement backcover before. Use guitar pick push the cover away from the frame to avoid breaking bigger clips while closing back.
[* black] Unclip both upper and loser part to get lower part easily out. Check out the back cover photo to identify the clip position.