Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #7

Edit by Terrance

Pending approval

Before
After
Unchanged

Step Lines

[* black] Drill four 1.5mm~2mm(1/16"~5/64") diameter, 3mm(1/8") deep holes at the left and right side of panel at the position corresponding to original LCD panel. Do NOT drill the glass!!. 2 will drill on metal and then plastic, 2 on plastic.
[* black] In these pics, the upper LCD is the original one, the bottom one is HV121P01.

Image 1

No previous image

Added

Image 2

No previous image

Added