Changes to Step #1
Edit by Jon Bailey —
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the antenna plate to the mini: |
| [* red] Two 6.6 mm T8 Torx screws ''(Note: these screws are connected to the hard drive)'' |
| [* red] Two 6.6 mm T8 Torx screws ''(Note: these screws are connected to the hard drive)'' |
| [* orange] Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work) |