Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use the flat end of a spudger to pry the right fan connector up out of its socket on the logic board.
[* icon_note] Pry upIt is useful to twist the spudger axially from beneath the wiresfan cable wires to release the connector.
[* icon_note] Pry upIt is useful to twist the spudger axially from beneath the wiresfan cable wires to release the connector.
[* black] Remove the right fan from the upper case.