Skip to main content

Changes to Step #14

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] TheNow that the I/O & logic board is attached toassembly are slightly separated from the I/O wallouter case, two small ears on the outer edges of the MiniI/O cover can be depressed to slide the assembly out further.
[* violet] After disconnecting the power cable, the logic board assembly slides right out.
[* black] TheNow that the I/O & logic board is attached toassembly are slightly separated from the I/O wallouter case, two small ears on the outer edges of the MiniI/O cover can be depressed to slide the assembly out further.
[* violet] After disconnecting the power cable, the logic board assembly slides right out.