Skip to main content

Changes to Step #2

Edit by Jon Kuzmich

Edit approved by Jon Kuzmich

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Do not move the plastic opening tool too deeply into the screen. Doing so may damage internal components.
[* icon_caution] Do not remove the display assembly from the frame. It is still connected by a cable.
[* black] Flip the phone over so it is layinglying on its back.
[* black] Flip the phone over so it is layinglying on its back.
[* black] Insert a plastic opening tool or a plastic opening pick in the space between the screen and the frame.
[* black] Gently lift the display assembly away from the frame until there is a small gap.
[* icon_note] If the display assembly won't budge, try heating it with a blow dryer or iOpener to soften the adhesive.