Skip to main content

Changes to Step #2

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Deleted
Added
Unchanged

Step Lines

[* black] Flip the phone over so it is lying on its back.
[* black] Insert a plastic opening tool or a plastic opening pick in the space between the screen and the frameframe and slide along the right side of the phone to loosen the adhesive.
[* black] Gently lift the display assembly away from the frame until there is a small gap.
[* icon_note] If
gap and leave the display assembly won't budge, try heating it withfirst opening pick in the bottom right corner next to your home button.
[* black] Insert
a blow dryer or iOpenersecond opening pick and slide it up to soften the adhesivetop left corner of the phone by loosening the adhesive beneath the display.
[* icon_caution] Do not insert the opening pick more than 3mm. There are some components that can be harmed
.
[* black] Insert a plastic opening tool or a plastic opening pick in the space between the screen and the frameframe and slide along the right side of the phone to loosen the adhesive.
[* black] Gently lift the display assembly away from the frame until there is a small gap.
[* icon_note] If
gap and leave the display assembly won't budge, try heating it withfirst opening pick in the bottom right corner next to your home button.
[* black] Insert
a blow dryer or iOpenersecond opening pick and slide it up to soften the adhesivetop left corner of the phone by loosening the adhesive beneath the display.
[* icon_caution] Do not insert the opening pick more than 3mm. There are some components that can be harmed
.