Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #3

Edit by gatortpk

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
[* icon_reminder] During reassembly, make sure not to pinch the pink andbacklight cable (with the white inverter cableconnector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
[* icon_reminder] During reassembly, make sure not to pinch the pink andbacklight cable (with the white inverter cableconnector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)