Skip to main content

Changes to this Step

Edit by Justin O

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[title] Unfasten the back cover
-[* black] Grab the precision screwdriver for this step
-[* red] Use the screwdriver to remove the 4 silver 2mmx3mm T5 screws that secure the back of the watch to the face
-[* icon_note] In case you aren't sure where these screws are located, you can find them in the four corners of the back of the watch
-[* icon_caution] These guys are microscopic in size so be careful you don't lose them!
-[* icon_note] It's a good idea to put a white cloth under the project so that if a tiny part does escape it will be contained on the cloth and easier to see
+[* icon_reminder] Grab the precision screwdriver for this step.
+[* red] Use the screwdriver to remove the 4 silver screws that secure the back of the watch to the face.
+ [* icon_note] You can find them in the four corners of the back of the watch
+ [* icon_caution] The screws are small so be careful you don't lose them!
+[* icon_note] It may be a good idea to put a white cloth under the project so that if a tiny part escapes it will be contained on the cloth.