Skip to main content

Changes to this Step

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Before
After
Unchanged

Step Lines

[title] Unfasten the back cover
-[* icon_reminder] Grab the precision screwdriver for this step.
-[* red] Use the screwdriver to remove the 4 silver screws that secure the back of the watch to the face.
- [* icon_note] You can find them in the four corners of the back of the watch
- [* icon_caution] The screws are small so be careful you don't lose them!
-[* icon_note] It may be a good idea to put a white cloth under the project so that if a tiny part escapes it will be contained on the cloth.
+[* red] Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.

Image 2

Deleted