Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by John

Edit approved by John

Before
After
Unchanged

Step Lines

[title] Opening TarDisk MiniDrive
[* black] TarDisk Teardown is similar theto Nifty TearDown. The sonic weld is on the front edges of the card. Work a razor blade or exactXacto knife along the weld from cap to MicroSD port opening.
[* black] TarDisk Teardown is similar theto Nifty TearDown. The sonic weld is on the front edges of the card. Work a razor blade or exactXacto knife along the weld from cap to MicroSD port opening.
[* black] Next Run blade along top weld and right side. Last run blade down between the front and back plastic to break weld at bottom that holds end-cap in place.
[* black] End-cap pops out of mold same as nifty. Circuit boardNifty. Adapter Chip should lift easily out of its mold.mold with little resistance.
[* black] Now the card is completely torn down into 4 parts
[* black] *Front Plastic Mold, *Rear Plastic Mold, *End-Cap *Adapter Chip
[* black] End-cap pops out of mold same as nifty. Circuit boardNifty. Adapter Chip should lift easily out of its mold.mold with little resistance.
[* black] Now the card is completely torn down into 4 parts
[* black] *Front Plastic Mold, *Rear Plastic Mold, *End-Cap *Adapter Chip