Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by John

Edit approved by John

Before
After
Unchanged

Step Lines

[*title] Opening TarDisk MiniDrive
[*
black] TarDisk Teardown is similar the sonic weld is on the front edges of the card (nifty was oncard. Work a razor blade or exact knife along the side) Endweld from cap is similar in creationto MicroSD port opening.
[* black] Next Run blade along top weld
and right side. It is easyhelpful to removerun razor down from top once top plasticcard is popped off.
[* black] The circuit chip in the TarDisk is very easy
opened to remove it's heldbreak sonic weld holding cap in place by the mold it sits in. Held bu mold walls and a small circular peg in the plastic mold that goes through the chip. Just lift the chip out.
[* black] Next we will examine both cards and their components side by sideTop should remove in one piece.
[*title] Opening TarDisk MiniDrive
[*
black] TarDisk Teardown is similar the sonic weld is on the front edges of the card (nifty was oncard. Work a razor blade or exact knife along the side) Endweld from cap is similar in creationto MicroSD port opening.
[* black] Next Run blade along top weld
and right side. It is easyhelpful to removerun razor down from top once top plasticcard is popped off.
[* black] The circuit chip in the TarDisk is very easy
opened to remove it's heldbreak sonic weld holding cap in place by the mold it sits in. Held bu mold walls and a small circular peg in the plastic mold that goes through the chip. Just lift the chip out.
[* black] Next we will examine both cards and their components side by sideTop should remove in one piece.