Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #1

Edit by John

Edit approved by John


Step Lines

[title] Opening up Nifty MiniDrive
[* black] We are taking apart the new Nifty MiniDrive Pro. Find the sonic weld where the front and back plastic pieces are fused together this is the easiest point to open, you will need a razor blade or an exact knife. In it 1st from MicroSD port to cap then along the top weld.
[* black] Last run blade down between the front and back plastic to break weld at bottom that holds end-cap in place.
[* black] Once you remove the top case you will have to remove the circuit card which is very tricky and requires an amount of pulling and breaking of the back paneling along the top.
[* black] Nifty's redesigned cap and mold make for easy end cap removal after top plastic mold is removed.