Skip to main content

Changes to Step #6

Edit by juanajusino

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert one end of the retaining clip beneath the edge of its recess cut into the LCD bracket.
-[* black] Use the edge of a metal spudger to push the tab on the other side of the retaining clip into the recess cut into the LCD bracket.
+[* black] Insert the longer end of the retaining clip beneath the edge of its recess cut into the LCD bracket.
+[* black] Use the edge of a metal spudger to push the shorter tab on the other side of the retaining clip into the recess cut into the LCD bracket.
[* icon_note] The second picture shows the LCD bracket properly installed.