Skip to main content

Changes to Step #9

Edit by Dan

Edit approved by Dan

Before
After
Unchanged

Step Lines

[title] Locating the fault
[* black] The membrane is composed of two thin layers of plastic that are - guess what...glued together. They are very difficult to separate and patience is key.
[* black] Use a thin blade to separate the layers at a corner (it helps to start at the corner closest to the faulty keys) and very slowly peel the layers apart. You probably won't need to separate them all the way, just enough to expose the region of the defective key should do.
+[* black] On the inside you'll find a mess of white lines and dots. These are the conductive traces. Track down the two pads that align under the key(s) you are having problems with.
+[* black] With your multimeter, check there are no breaks in the tracks between the pad in question and it's neighbours. You can follow the lines to see which ones should be electrically connected.
+[* black] Try to find the exact point where the track is broken, and make a note of where it is. A page marker is great for this.