Skip to main content

Changes to Step #8

Edit by Dan

Edit approved by Dan


Step Lines

[title] Removing the damaged membrane
[* black] Finally, we're in!
[* black] Now you've removed the metal plate, you'll be presented with the membrane we need to repair.
[* black] The ribbon cable from earlier is a part of it, and it needs to be fished through it's tiny slot before you can remove the membrane. There may be a little glue holding it down, in which case pull up slowly at a shallow angle to release it.
+[* black] Underneath it is a sheet with tactile domes serving to press the pads on the membrane together. This sheet can stay here as it's of no concern to us.