Skip to main content

Changes to Step #5

Edit by Dan

Edit approved by Dan

Before
After
Unchanged

Step Lines

+[title] The Hard Bit - Removing the bottom cover.
[* black] Do not rush this next step. Using a prying tool, gently ease an edge of the plastic cover up. You may need a razor blade to get this started as there's not much clearance.
-[* black] Now, use the prying tool to separate the cover from the adhesive holding it down. Do not be tempted to pull or bend it, this plastic cover is very thin ABS and will distort.
+[* black] Now, use the prying tool to separate the cover from the now softened adhesive holding it down. Do not be tempted to pull or bend it, this plastic cover is very thin ABS and will distort.