Skip to main content

Changes to Step #4

Edit by Dan

Edit approved by Dan


Step Lines

-[title] The Hard Bit - Removing the bottom panel
+[title] Preparing to tear-down.
[* black] This is the point of no return. If you are not sure you want to continue, this is your last chance. Everything up until now can be undone.
[* black] Put your keyboard in the oven at 100-150°C and bake until golden brown. (To clarify, do not leave it in that long!). Allow the entire keyboard to reach temperature and idle there for about 5 minutes, then remove it from the oven. Careful, it's hot!