Skip to main content

Changes to Step #2

Edit by Chad Jackson

Edit approved by Chad Jackson

Before
After
Unchanged

Step Lines

[title] Removing the Motherboard Cover
[* red] Using our #00 screwdriver, we remove the screws around the outer edge of the upper interior cover of the phone that houses the motherboard and cameras.*** ''See info note below!''***
-[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are 3.175 mm philips 00.
+[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are philips 00, and 3.175 mm. in lenght.
[* black] Once all of the screws have been removed, you can pry the cover off with with the blue opening tool, exposing the motherboard.
[* icon_note] Keep in mind that there are two hidden screws. One underneath the white tamper sticker(uh-oh) and a second under the plastic plug(circled in red). Tweezers are an effective tool for removing the plug.