Skip to main content

Changes to Step #2

Edit by Chad Jackson

Edit approved by Chad Jackson

Before
After
Unchanged

Step Lines

[title] Removing the Motherboard Cover
[* red] Using our #00 screwdriver, we remove the screws around the outer edge of the upper interior cover of the phone that houses the motherboard and cameras.*** ''See info note below!''***
-[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are 3.175 mm.
+[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are 3.175 mm philips 00.
[* black] Once all of the screws have been removed, you can pry the cover off with with the blue opening tool, exposing the motherboard.
[* icon_note] Keep in mind that there are two hidden screws. One underneath the white tamper sticker(uh-oh) and a second under the plastic plug(circled in red). Tweezers are an effective tool for removing the plug.