Skip to main content

Changes to Step #2

Edit by Chad Jackson

Edit approved by Chad Jackson


Step Lines

[title] Removing the Motherboard Cover
-[* red] Using our #00 screwdriver, we must remove the screws from the interior cover of the phone that holds the motherboard and cameras. See ''info'' note below.
+[* red] Using our #00 screwdriver, we remove the screws around the outer edge of the upper interior cover of the phone that houses the motherboard and cameras.*** ''See info note below!''***
[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are 3.175 mm.
[* black] Once all of the screws have been removed, you can pry the cover off with with the blue opening tool, exposing the motherboard.
[* icon_note] Keep in mind that there are two hidden screws. One underneath the white tamper sticker and a second under the plastic plug. Tweezers are an effective tool for removing the plug.