Skip to main content

Changes to Step #2

Edit by Julia List

Edit approved by Julia List

Before
After
Unchanged

Step Lines

[title] Removing the Motherboard Cover
-[* red] Using our #00 screwdriver, we remove the screws around the outer edge of the upper interior cover of the phone that houses the motherboard and cameras.*** ''See info note below!''***
- [* icon_note] Keep in mind that there are four hidden screws. One underneath the white tamper sticker(uh-oh) and a second under the plastic plug(circled in red), and 2 more under plastic plugs to the left and right of the camera. Tweezers are an effective tool for removing the plug.
-[* black] Luckily, the OnePlus One was assembled with all of the same size screws save for the one holding down the motherboard. All of ''these'' screws are Philips 00 and 3.175 mm. in length.
-[* black] Once all of the 9 screws have been removed, you can pry the cover off with the blue opening tool, exposing the motherboard.
+[* red] Using a pair of tweezers, remove the plastic plugs.
+ [* black] Once the hidden screws are revealed, use a PH #00 screwdriver to remove the three 3.175mm screws.
+[* orange] Use the PH #00 screwdriver to remove the remaining six 3.175 screws.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version