Skip to main content

Changes to Step #7

Edit by iRobot

Pending approval


Step Lines

+[* black] Hold the display with one hand while removing the screws from the left hinge mount.
+[* black] Remove the following 3 screws from the left hinge mount:
+ [* red] One 6 mm smaller diameter Phillips from the right side.
+ [* orange] One 6 mm larger diameter Phillips from the middle.
+ [* yellow] One 10 mm Phillips from the left side.
+[* black] Lift the left hinge mount out of the computer.

Image 1

No previous image