Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove two T6 Torx screws from each side of the hard drive (four screws total).
[* icon_reminder] You'll need to transfer these screws to your new hard drive if you're changing drives.
[* black] If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.