Skip to main content

Changes to Step #5

Edit by David Hodson

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove three 3.8 mm T5 Torx screws securing the logic boardmotherboard to the front case.
[* icon_caution] Don't attempt to remove the logic boardmotherboard yet, it is still attached by the keypad ribbon connector.
[* red] Remove three 3.8 mm T5 Torx screws securing the logic boardmotherboard to the front case.
[* icon_caution] Don't attempt to remove the logic boardmotherboard yet, it is still attached by the keypad ribbon connector.