Skip to main content

Changes to Step #5

Edit by David Hodson

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove three 3.753.8 mm T4T5 Torx screws securing the logic board to the front case.
[* icon_caution] Don't attempt to remove the logic board yet, it is still attached by anotherthe keypad ribbon cableconnector.
[* red] Remove three 3.753.8 mm T4T5 Torx screws securing the logic board to the front case.
[* icon_caution] Don't attempt to remove the logic board yet, it is still attached by anotherthe keypad ribbon cableconnector.