Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen


Step Lines

[* black] Peel back the final battery adhesive tab from the bottom edge of the battery.
[* black] Gently pull the battery adhesive tab upward and away from the battery, allowing the adhesive strip to slowly slide out from between the battery and the rear case.
[* icon_caution] Place one hand over the battery as the final strip comes out, or it may fling the battery out of the iPhone.
[* black] Continue pulling until the final strip comes free from the iPhone.
[* black] If you removed all three adhesive strips successfully, '''[guide|29424|skip over the next two steps|stepid=69610]'''.
[* icon_caution] If any of the adhesive strips broke off underneath the battery and could not be retrieved, '''continue with the next step below'''.