Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Gently pull the battery adhesive tab straight upward.
[* black] To avoid tearing the adhesive strip be careful not to pull against the battery or lower components.
[* icon_note] If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If any of the adhesive strips break underneath the battery and cannot be retrieved, '''skiptry to step 25remove the remaining strips, and then proceed to '''[guide|29424|Step 25|stepid=69623]'''.
[* icon_caution] If any of the adhesive strips break underneath the battery and cannot be retrieved, '''skiptry to step 25remove the remaining strips, and then proceed to '''[guide|29424|Step 25|stepid=69623]'''.